Infusion Pump With Accessories

Infusion Pump With Accessories

Product Code : EL-RAAE-10967

Quick answer: The volumetric infusion pump is a single-channel peristaltic pump that delivers IV fluids and drugs at a set rate and volume, used on wards, in ICUs and in theatre where gravity drips are not accurate enough. It runs 1-1,200 ml/h in 1 ml/h steps with ±5% accuracy, works on AC or battery and alarms on air or occlusion. Lab Exports manufactures it in Delhi for hospitals, clinics and medical colleges.

Specifications

ParameterValue
TypeVolumetric, portable, single channel, peristaltic
PowerAC and battery; 110-220 V, 50-60 Hz; 25 W
Flow rate1-1,200 ml/h (minimum guaranteed range), 1 ml/h steps
Accuracy±5%
Volume limit1-9,999 ml, 1 ml steps
Bolus programme100-900 ml/h
KVO1 ml/h below 10 ml/h infusion rate; 3 ml/h above
BatteryOver 5 hours at 30 ml/h
MountingRail and IV pole
EnclosureSturdy, splash- and shock-proof plastic
Infusion setsOpen system, works with commercial infusion sets

The accessories supplied with the pump are confirmed with each quotation.

How the infusion pump is used

A volumetric pump moves fluid by squeezing a length of the infusion set tubing with a peristaltic mechanism, so the volume pumped per hour is fixed by the mechanism rather than by the height of the bag or the patient's venous pressure. That gives a steady, known rate for fluids, antibiotics and other infusions where a gravity drip would drift.

The pump is programmed by volume, time and rate. When the set volume has been delivered it drops to a keep-vein-open (KVO) rate of 1 or 3 ml/h so the cannula does not block, and a bolus programme of 100-900 ml/h allows rapid delivery when ordered.

  1. Mount the pump on an IV pole or rail and connect it to mains power or run it on battery.
  2. Load a standard infusion set into the pump and close the door.
  3. Enter the rate and the volume limit or time, and start the infusion after the self-test.
  4. Respond to any alarm: occlusion, air-in-line, door open, battery or power status, or system error.

Key features

  • Programmable by volume, time and flow rate
  • Air bubble and occlusion detection with automatic self-test
  • Audio and visual alarms with silencing for occlusion, air-in-line, door open, battery or power status and system errors
  • KVO programme and 100-900 ml/h bolus
  • Open system that accepts commercial infusion sets
  • Splash- and shock-proof enclosure with rail and IV pole mounting

Documentation and supply

Operating instructions and a user manual are supplied with the pump. Most Lab Exports products carry a one-year manufacturer warranty.

Lab Exports manufactures the infusion pump at its works in Laxmi Nagar, Delhi, and supplies it to hospitals, clinics and medical colleges in India and 60+ countries, handling the export documents for each shipment. More about the company is on the About Lab Exports page.

Related Resuscitation and Anaesthesiology Equipment products

The full range is in the Resuscitation and Anaesthesiology Equipment section of the Hospital Lab range.

Frequently asked questions

What is the flow range of the infusion pump?

1-1,200 ml/h in 1 ml/h steps, with ±5% accuracy; the volume limit can be set from 1 to 9,999 ml.

How long does the battery last?

More than 5 hours at 30 ml/h.

Does the pump need special infusion sets?

No. It is an open system compatible with commercial infusion sets.

What is the price of the infusion pump?

Prices are not published on the website. Add the infusion pump to the Enquiry Cart with the Add To Cart button on this page, or email [email protected] with the house code EL-RAAE-10967 and the quantity, to receive a quotation.

Does Lab Exports manufacture the infusion pump?

Yes. Lab Exports manufactures the infusion pump at its works at 11/315, Lalita Park, Laxmi Nagar, Delhi 110092, under house code EL-RAAE-10967.

Request a quote

Email [email protected] with the house code EL-RAAE-10967 and the quantity, or add the infusion pump to the Enquiry Cart with the Add To Cart button on this page. Tender buyers can also see the Tenders and OEM page.

   

Office Address

Works:11/315, Lalita Park, Laxmi Nagar, Delhi, 110092

[email protected]

Follow Us