Engineering Lab Manufacturer, Suppliers and Exporter in India
Lab Exports is leading Engineering Lab Manufacturer,and supplier and Exporter in India, Quick answer: Lab Exports is an engineering lab equipment manufacturer in India, based in Laxmi Nagar, Delhi, since 1986. Its engineering range lists 71 apparatus in five groups: theory of machines, fluid mechanics, hydraulic machines, flume equipment and heat transfer. Each apparatus has a house product code, and the range serves engineering colleges, polytechnics and TVET institutes in India and 60+ countries.Engineering lab equipment range
The engineering range is organised into five subcategories. Each subcategory page lists its apparatus with house codes, specification tables and related products.
| Subcategory | What it covers | Example apparatus (house code) |
|---|---|---|
| Theory of Machine Lab (18 apparatus) | Balancing, gyroscopic couple, governors, cams, gear trains, vibration, bearings, belt slip and cutting-force dynamometers | Motorised Gyroscope Apparatus (EL-TOML-11020); Whirling of Shaft Apparatus (EL-TOML-11022); Journal Bearing Apparatus (EL-TOML-11030) |
| Fluid Mechanics Lab (13 apparatus) | Flow measurement, pipe friction and fitting losses, jet impact, vortex flow, stability of floating bodies, notches and weirs | Bernoulli Theorem Apparatus (EL-FML-11038); Reynolds Apparatus (EL-FML-11037); Metacentric Height Apparatus (EL-FML-11044) |
| Hydraulic Machine Lab (11 apparatus) | Turbine and pump performance test set-ups, a hydraulic ram and a hydraulic bench | Pelton Wheel Turbine Test Setup (EL-HML-11050); Francis Turbine Test Setup (EL-HML-11051); Centrifugal Pump Test Rig (EL-HML-11053) |
| Experimental Flume Flow Channel Apparatus (13 apparatus) | An open-channel flume with interchangeable gates and weirs, and flow and level measuring instruments | Experimental Flume Flow Channel Apparatus (EL-EFFCA-11061); Broad Crested Weir (EL-EFFCA-11070); Venturi Flume (EL-EFFCA-11066) |
| Heat Transfer Lab (16 apparatus) | Conduction, insulation, fins, natural and forced convection, radiation, boiling heat flux and heat exchangers | Composite Walls Apparatus (EL-HTL-11078); Pin Fin Apparatus (EL-HTL-11082); Shell and Tube Heat Exchanger, Water to Water (EL-HTL-11092) |
Products in the engineering lab range
The list below matches the products published in each subcategory. House codes carry the prefix of their group: EL-TOML (theory of machines), EL-FML (fluid mechanics), EL-HML (hydraulic machines), EL-EFFCA (flume and open channel) and EL-HTL (heat transfer).
Theory of machines (18)
- Static and Dynamic Balancing Apparatus (EL-TOML-11019)
- Motorised Gyroscope Apparatus (EL-TOML-11020)
- Motorised Governor Apparatus (EL-TOML-11021)
- Whirling of Shaft Apparatus (EL-TOML-11022)
- Cam Analysis Apparatus (EL-TOML-11023)
- Vibration Lab, complete set of 11 experiments (EL-TOML-11024)
- Generation of Involute Gear Tooth Profile (EL-TOML-11025)
- Interference and Undercutting (EL-TOML-11026)
- Coriolis Component of Acceleration Apparatus (EL-TOML-11027)
- Slip and Creep Measurement Apparatus (EL-TOML-11028)
- Epicyclic Gear Train Holding Torque Apparatus (EL-TOML-11029)
- Journal Bearing Apparatus (EL-TOML-11030)
- Dead Weight Pressure Gauge Tester (EL-TOML-11031)
- Tool Dynamometers (EL-TOML-11032)
- Milling Tool Dynamometer (EL-TOML-11033)
- Grinder Tool Dynamometer (EL-TOML-11034)
- Lathe Tool Dynamometer (EL-TOML-11035)
- Drilling Tool Dynamometer (EL-TOML-11036)
Fluid mechanics (13)
- Reynolds Apparatus (EL-FML-11037)
- Bernoulli Theorem Apparatus (EL-FML-11038)
- Discharge over Notches Apparatus (EL-FML-11039)
- Venturimeter and Orificemeter Calibration Set-up (EL-FML-11040)
- Study of Pipe Fittings (EL-FML-11041)
- Friction in Pipe Lines Apparatus (EL-FML-11042)
- Impact of Jet on Vanes Apparatus (EL-FML-11043)
- Metacentric Height Apparatus (EL-FML-11044)
- Pitot Static Tube Set-up (EL-FML-11045)
- Free and Forced Vortex Apparatus (EL-FML-11046)
- Orifice and Mouthpiece Apparatus (EL-FML-11047)
- Study of Flow Measurement Devices (EL-FML-11048)
- Flow over Weir or Open Channel Apparatus (EL-FML-11049)
Hydraulic machines (11)
- Pelton Wheel Turbine Test Setup (EL-HML-11050)
- Francis Turbine Test Setup (EL-HML-11051)
- Kaplan Turbine Test Setup (EL-HML-11052)
- Centrifugal Pump Test Rig (EL-HML-11053)
- Multi-stage Centrifugal Pump Test Setup (EL-HML-11054)
- Reciprocating Pump Test Setup (EL-HML-11055)
- Gear Pump Test Setup (EL-HML-11056)
- Hydraulic Ram Test Setup (EL-HML-11057)
- Jet Pump Test Setup (EL-HML-11058)
- Submersible Pump Test Rig (EL-HML-11059)
- Hydraulic Bench Apparatus (EL-HML-11060)
Flume and open-channel equipment (13)
- Experimental Flume Flow Channel Apparatus (EL-EFFCA-11061)
- Sluice Gate (EL-EFFCA-11062)
- Radial Gate (EL-EFFCA-11063)
- Ogee-Crested Weir with Pressure Measurement (EL-EFFCA-11065)
- Venturi Flume (EL-EFFCA-11066)
- Set of Plate Weirs, Four Types (EL-EFFCA-11068)
- Extension Element of the Experimental Flume (EL-EFFCA-11069)
- Broad Crested Weir (EL-EFFCA-11070)
- Pitot Static Tube (EL-EFFCA-11071)
- Velocity Meter (EL-EFFCA-11072)
- Digital Level Gauge (EL-EFFCA-11075)
- Flow Channel Apparatus (EL-EFFCA-11076)
- Pipe Network Apparatus (EL-EFFCA-11077)
Heat transfer (16)
- Composite Walls Apparatus (EL-HTL-11078)
- Lagged Pipe Apparatus (EL-HTL-11079)
- Heat Pipe Apparatus (EL-HTL-11080)
- Critical Radius of Insulating Material (EL-HTL-11081)
- Pin Fin Apparatus (EL-HTL-11082)
- Natural Convection Apparatus (EL-HTL-11083)
- Forced Convection Apparatus (EL-HTL-11084)
- Specific Heat of Air Apparatus (EL-HTL-11085)
- Heat Transfer in Agitated Vessel (EL-HTL-11087)
- Emissivity Measurement Apparatus (EL-HTL-11088)
- Stefan-Boltzmann Apparatus (EL-HTL-11089)
- Critical Heat Flux Apparatus (EL-HTL-11090)
- Concentric Tube Heat Exchanger (EL-HTL-11091)
- Shell and Tube Heat Exchanger, Water to Water (EL-HTL-11092)
- Plate Type Heat Exchanger Apparatus (EL-HTL-11093)
- Thermal Conductivity of Metal Rod (EL-HTL-11094)
Experiments the apparatus are used for
The fluid mechanics and flume apparatus are used to verify Bernoulli's theorem, observe laminar and turbulent flow with the Reynolds apparatus, find the metacentric height of a floating body, and measure coefficients of discharge for notches, orifices, mouthpieces, venturimeters and orificemeters. Other experiments cover friction losses in pipes and pipe fittings, the force of a water jet on vanes, free and forced vortex profiles, and flow over weirs, sluice gates and radial gates in an open channel.
The hydraulic machine set-ups are used to plot the performance characteristics of Pelton, Francis and Kaplan turbines, and of centrifugal, multi-stage, reciprocating, gear, jet and submersible pumps. The same group includes a hydraulic ram test set-up and a hydraulic bench.
The theory of machines apparatus cover static and dynamic balancing, gyroscopic couple, governor characteristics, whirling speed of shafts, cam and follower motion, involute gear tooth generation and undercutting, the Coriolis component of acceleration, belt slip and creep, and epicyclic gear train holding torque. They also cover journal bearing pressure distribution, pressure gauge calibration with a dead weight tester, and cutting-force measurement with lathe, milling, drilling and grinding tool dynamometers.
The heat transfer apparatus cover the thermal conductivity of a metal rod, heat flow through composite walls and a lagged pipe, the critical radius of insulation, heat pipe performance and pin fin behaviour. They also measure natural and forced convection coefficients, the specific heat of air, emissivity and the Stefan-Boltzmann constant, critical heat flux, heat transfer in an agitated vessel, and the performance of concentric tube, shell and tube, and plate heat exchangers.
These experiments are part of mechanical, civil and chemical engineering laboratory courses at degree and diploma level.
Specifications and documentation
Each product page carries a specification table for that apparatus. For example, the Bernoulli Theorem Apparatus (EL-FML-11038) has an acrylic test section for flow visualisation, stainless-steel inlet and supply tanks and nine piezometer tubes. The Pelton Wheel Turbine Test Setup (EL-HML-11050) is listed in three output ratings of 1 kW, 1.5 kW and 3.75 kW, with a rope brake dynamometer. The Composite Walls Apparatus (EL-HTL-11078) uses a mica heater with a multichannel digital temperature indicator. Service requirements, such as a 230 V AC supply and bench area, are stated on the product page where they apply.
Most Lab Exports products carry a one-year manufacturer warranty. Installation instructions and manuals are supplied with the equipment, and on-site installation is offered in certain areas for engineering equipment. Calibration certificates traceable to national standards are available on request for select engineering apparatus.
Who buys Lab Exports engineering lab equipment
Buyers include engineering colleges and university departments that set up or extend mechanical, civil and chemical engineering laboratories. Polytechnics, ITIs and TVET institutes buy the same apparatus for diploma and skills courses. Government and NGO education projects buy laboratory lots by tender; the Tenders and OEM page explains tender supply.
Lab Exports works from 11/315, Lalita Park, Laxmi Nagar, Delhi 110092. It exports laboratory equipment to institutions in 60+ countries across Asia, Africa, Europe and the Americas, and handles the export documents for each shipment.
Related ranges
Engineering laboratories often order alongside the Applied Mechanics apparatus in the Physics Lab range, and general items such as water baths, balances and hot plates from the Laboratory Equipment range.
Frequently asked questions
Does Lab Exports manufacture engineering lab equipment or trade it?
Lab Exports manufactures its engineering lab equipment and lists its works at 11/315, Lalita Park, Laxmi Nagar, Delhi 110092. Every apparatus has a house product code, such as EL-FML-11038 for the Bernoulli Theorem Apparatus, and a published specification table.
What equipment is in a fluid mechanics lab?
A fluid mechanics lab from this range usually includes the Reynolds apparatus, Bernoulli theorem apparatus, venturimeter and orificemeter calibration set-up, pipe friction and pipe fittings apparatus, impact of jet on vanes, metacentric height apparatus, notches, orifice and mouthpiece apparatus, pitot static tube and free and forced vortex apparatus. All 13 are listed in the Fluid Mechanics Lab subcategory.
How is engineering lab equipment priced?
Prices are not published on the website. Use the Add To Cart button on each product page to build an enquiry, or email [email protected] with product names or house codes and quantities, to receive a quotation.
Can Lab Exports supply a complete engineering lab for a college or TVET institute?
Yes. Apparatus from all five subcategories can be quoted together in one enquiry, so a new mechanical, civil or chemical engineering laboratory can be specified from one list of house codes. Tender buyers can also use the Tenders and OEM page.
Does Lab Exports export engineering lab equipment?
Yes. Lab Exports supplies institutions in 60+ countries from Delhi and handles the export documents for each shipment.
What warranty and after-sales support come with engineering apparatus?
Most products carry a one-year manufacturer warranty. Installation instructions and manuals are supplied, on-site installation is offered in certain areas for engineering equipment, and calibration certificates traceable to national standards are available on request for select apparatus.
Which courses is the engineering range suitable for?
The range suits degree and diploma laboratories in mechanical, civil and chemical engineering, including polytechnic and TVET courses.
Request a quote
Send product names or house codes and quantities to [email protected] or through the Contact page. Institutional and government buyers can review tender supply on the Tenders and OEM page.
