Retort Clamp Manufacturer, Suppliers and Exporter in India
Lab Exports is leading Retort Clamp Manufacturer,and supplier and Exporter in India Quick answer: Retort clamps in this subcategory are manufactured by Lab Exports at its Laxmi Nagar works in Delhi, in operation since 1986. Nine clamps carry EL-RC codes, including two retort clamps with a bosshead already fitted, cork and rubber jaw clamps, PVC and stainless steel three- and four-prong clamps, and three-finger clamps. Lab Exports ships to 60+ countries.Retort clamp types and house codes
All nine retort clamps are listed with the jaw type and clamping range shown on each product page.
| Product | House code | Jaws and clamping range |
|---|---|---|
| Retort Clamp with Bosshead, Cork Jaws | EL-RC-10818 | Die-cast alloy, cork-lined jaws, bosshead for rods up to 15 mm |
| Retort Clamp with Bosshead, Rubber Jaws | EL-RC-10817 | Die-cast alloy, rubber-lined jaws, bosshead for rods up to 15 mm |
| Retort Clamp, Rubber Jaws | EL-RC-10815 | Opens to 90 mm, 135 x 8 mm rod, 250 mm long |
| Retort Clamp, Cork Jaws | EL-RC-10816 | Four cork-lined prongs, 2 to 90 mm, 245 mm long |
| Retort Clamp 3 Prongs | EL-RC-10821 | Red PVC, 140 mm, 12 to 100 mm |
| Retort Clamp Standard 18/10 Stainless Steel | EL-RC-10823 | Jaw sizes including 25, 40, 60 and 80 mm; 10 or 12 mm rod |
| Retort Clamp Special 3-Prongs, 18/10 Stainless Steel | EL-RC-10822 | 190 mm, 12 mm rod, 0 to 80 mm or 0 to 120 mm |
| Retort Clamp Special 4-Prongs | EL-RC-10819 | 18/10 stainless steel, three sizes opening up to 15 cm |
| 3 Finger Clamps With Shaft | EL-RC-10820 | Chromium plated, 15 cm long, 10 mm rod, opens to 35 or 60 mm |
Where retort clamps are used
A retort clamp grips a flask, condenser or tube and is fixed to a retort stand rod, either through a separate bosshead or through one built into the clamp. In a distillation practical one clamp holds the neck of the round-bottom flask over the heat source and another holds the condenser; in reflux and other heating set-ups the clamp keeps the apparatus steady.
Cork and rubber linings protect glassware where it meets the metal jaws. The three- and four-prong stainless steel clamps grip round-bottom flasks and other cylindrical glassware across wide diameter ranges, and the three-finger clamps suit narrower tubes and vessels up to 60 mm.
Retort clamp specifications
The Retort Clamp Special 4-Prongs (EL-RC-10819) is made of 18/10 stainless steel on a 12 mm rod in three sizes: 15 cm long for 0 to 12 cm, and 19 cm long for 2 to 10 cm or 5 to 15 cm. The Retort Clamp, Rubber Jaws (EL-RC-10815) has die-cast rubber-lined jaws opening to 90 mm, an 8 mm rod 135 mm long and an overall length of 250 mm, with the clamping rod working through swivels mounted in the jaws.
Retort clamp FAQs
Is a retort clamp with bosshead available?
Yes, in two versions: cork jaws (EL-RC-10818) and rubber jaws (EL-RC-10817). The fitted bosshead takes retort stand rods up to 15 mm in diameter, so no separate bosshead is needed.
Cork jaws or rubber jaws: which should be chosen?
Both linings cushion the glass in the jaws; the cork-jaw clamps are listed for protecting delicate glassware. Each lining is offered with and without an integrated bosshead.
Which clamp holds the largest flask?
The larger Retort Clamp Special 4-Prongs opens from 5 to 15 cm, and the Special 3-Prongs model reaches 12 cm.
How are retort clamps quoted?
Retort clamps are priced on request. Send the EL-RC codes, the jaw size and the number required to [email protected] for a quotation.
Related ranges
Retort clamps are part of the Laboratory Equipment range. Separate right-angle and swivel bossheads are in Bosshead, the flask under the clamp is heated with Burners or a Heating Mantle, and burette clamps and stands are listed under Burettes in Chemistry Lab.
Enquiries: [email protected] or the Contact page.
Retort Clamp, Rubber Jaws
Product Code : EL-RC-10815
Retort clamp with rubber-lined diecast jaws opening to 90 mm, 8 mm diameter rod 135 mm long, 250 mm overall; clamping rod works through swivels.
Note:
View Details
Retort Clamp, Cork Jaws
Product Code : EL-RC-10816
Four-prong retort clamp with fixed cork linings, holds items 2-90 mm in diameter, 245 mm overall with 145 mm rod, blue coated finish.
Note:
View Details
Retort Clamp with Bosshead, Rubber Jaws
Product Code : EL-RC-10817
Diecast alloy retort clamp with rubber-lined jaws, supplied with a bosshead that fits support rods up to 15 mm diameter.
Note:
View Details
Retort Clamp with Bosshead, Cork Jaws
Product Code : EL-RC-10818
Diecast alloy retort clamp with cork-lined jaws that protect glassware, supplied with a bosshead for support rods up to 15 mm diameter.
Note:
View Details
Retort Clamp Special 4-Prongs
Product Code : EL-RC-10819
Four-prong retort clamp in 18/10 stainless steel with silicone-coated fingers, 12 mm rod, clamping ranges 0-120, 20-100 and 50-150 mm.
Note:
View Details
3 Finger Clamps With Shaft
Product Code : EL-RC-10820
Chromium-plated three-finger clamp with PVC-coated fingers and 10 mm shaft, 150 mm long, in 0-35 mm and 0-60 mm clamping ranges.
Note:
View Details
Retort Clamp 3 Prongs
Product Code : EL-RC-10821
Three-prong retort clamp in red PVC, 140 mm long, holds items 12-100 mm across; span set by two independent regulating screws.
Note:
View Details
Retort Clamp Special 3-Prongs, 18/10-Stainless Steel
Product Code : EL-RC-10822
Three-prong retort clamp in 18/10 stainless steel with silicone-coated fingers, 190 mm long, 12 mm rod, 0-80 mm or 0-120 mm range.
Note:
View Details
Retort Clamp Standard 18/10 Stainless Steel
Product Code : EL-RC-10823
Round-jaw retort clamp in 18/10 stainless steel, seven sizes: 25, 40 and 60 mm on a 10 mm rod; 80, 100, 120 and 150 mm on a 12 mm rod.
Note:
View Details