Laboratory Incubator With Visibility Door
Product Code : EL-LI-10773
Quick answer: The laboratory incubator with visibility door is a general purpose heated cabinet for incubation, drying and gentle heating, with a door through which the contents can be checked without opening the chamber. It has a 100 litre aluminium clad steel chamber, runs up to 100 °C with 0.75 °C fluctuation and uses PID digital control. Lab Exports manufactures it in Delhi for school, college and research laboratories.
Specifications
| Parameter | Specification |
|---|---|
| Capacity | 100 litres |
| Chamber | Aluminium clad steel |
| Exterior | Powder-coated sheet steel |
| Maximum temperature | 100 °C |
| Temperature fluctuation | 0.75 °C |
| Power | 750 W |
| Controller | PID digital, dual display (set and actual), programmable ramp and dwell |
| Overheat protection | Calibrated safety thermostat |
| Indicator lamps | Power, heating, safety protection |
| Shelves | Plated steel, adjustable on fixed shelf runners |
| Maximum load height | 360 mm |
| Access port | Top vent for thermometers and probes |
| External dimensions (H x W x D) | 735 x 590 x 567 mm |
| Internal dimensions (H x W x D) | 445 x 490 x 460 mm |
How the incubator is used
An incubator holds its chamber at a steady temperature for hours or days. This general purpose model covers the range from just above ambient up to 100 °C, so it serves microbiology incubation, such as growing bacterial cultures at around 37 °C, as well as drying and gentle heating of samples and materials. The PID controller shows the set and actual temperatures side by side and keeps fluctuation to 0.75 °C.
Ramp and dwell programming lets the chamber rise at a controlled rate and then hold, which suits curing, conditioning and staged drying. The visibility door means cultures and samples can be checked without opening the chamber and losing heat, and the top vent takes a reference thermometer or monitoring probe.
- Set the shelves at the heights needed, within the 360 mm maximum load height.
- Enter the set temperature, or a ramp and dwell programme, on the PID controller.
- Let the chamber stabilise before loading cultures or samples.
- Check the contents through the visibility door during the run.
- Use the top vent to insert a thermometer if an independent reading is required.
Key features
- PID digital controller with dual display and programmable ramp and dwell
- Visibility door for monitoring contents without opening the chamber
- Aluminium clad steel chamber in a powder-coated steel cabinet
- Overheat safety protection with indicator lamps
- Adjustable plated steel shelves on fixed runners
- Top vent and access port for probes
Documentation and supply
Installation instructions and a manual are supplied with the apparatus. Most Lab Exports products carry a one-year manufacturer warranty.
Lab Exports manufactures the Laboratory Incubator with Visibility Door at its works in Laxmi Nagar, Delhi, and supplies it to school, college, research and industrial laboratories in India and 60+ countries, handling the export documents for each shipment. More about the company is on the About Lab Exports page.
Related Laboratory Instruments products
- Moisture Analyser (EL-LI-10772)
- Laboratory Drying/Warming Cabinet (EL-LI-10774)
- Orbital Shaker, Digital (EL-LI-10770)
- Polypropylene Inverted Mobile Fume Cabinet (EL-LI-10776)
- Oven, 43 litre (EL-LI-10769)
- Polypropylene Ducted Fume Cupboard (EL-LI-10777)
The full range is in the Laboratory Instruments section of the Laboratory Equipment range.
Frequently asked questions
What is the capacity and temperature range of the laboratory incubator?
It has a 100 litre chamber (445 x 490 x 460 mm inside) and operates up to 100 °C with 0.75 °C fluctuation.
What is the visibility door for?
It lets the contents be inspected without opening the chamber, so the temperature is not disturbed during incubation.
Can the incubator run a temperature programme?
Yes. The PID digital controller has programmable ramp and dwell control, so the chamber can rise at a set rate and then hold.
What is the price of the Laboratory Incubator with Visibility Door?
Prices are not published on the website. Add the Laboratory Incubator with Visibility Door to the Enquiry Cart with the Add To Cart button on this page, or email [email protected] with the house code EL-LI-10773 and the quantity, to receive a quotation.
Does Lab Exports manufacture the Laboratory Incubator with Visibility Door?
Yes. Lab Exports manufactures the Laboratory Incubator with Visibility Door at its works at 11/315, Lalita Park, Laxmi Nagar, Delhi 110092, under house code EL-LI-10773.
Request a quote
Email [email protected] with the house code EL-LI-10773 and the quantity, or add the Laboratory Incubator with Visibility Door to the Enquiry Cart with the Add To Cart button on this page. Tender buyers can also see the Tenders and OEM page.
