Laboratory Drying/Warming Cabinet
Product Code : EL-LI-10774
Quick answer: The laboratory drying/warming cabinet is a low-temperature heated cabinet used for drying washed glassware and gently warming samples and reagents at up to about 50 °C. It has a 113 litre single skin sheet steel body with an easy-clean grey stove paint finish, two adjustable wire shelves and a 240 V, 500 W supply. Lab Exports manufactures it in Delhi for school, college and research laboratories.
Specifications
| Parameter | Specification |
|---|---|
| Capacity | 113 litres |
| External dimensions | 545 x 730 x 360 mm |
| Internal dimensions | 460 x 728 x 341 mm |
| Shelves | 2, adjustable wire shelves |
| Temperature control | Adjustable, up to approx. 50 °C |
| Power | 240 V, 500 W |
| Body | Single skin sheet steel, easy-clean grey stove paint finish |
Uses
A drying cabinet works at a much lower temperature than a laboratory oven. At up to about 50 °C, warm air dries rinsed glassware and plasticware without the thermal stress of oven drying, which matters for volumetric flasks, pipettes and burettes, whose calibrated volumes should not be exposed to high heat, and for plastic items that soften in a hot oven.
The same gentle heat is used to warm reagents, solutions and samples a little above room temperature before use, and to keep items dry between classes. The two wire shelves adjust to take tall flasks or several layers of smaller glassware, and the painted steel interior wipes clean.
- Rinse the glassware and let excess water drain.
- Set the shelves to suit the items and place them in the cabinet, open ends down or angled so water can run off.
- Set the temperature control, up to about 50 °C.
- Leave the items to dry, then remove them for storage or use.
Key features
- Adjustable temperature control up to approximately 50 °C
- 113 litre capacity for routine drying and warming
- Two adjustable wire shelves for glassware of different sizes
- Single skin sheet steel body with easy-clean grey stove paint finish
- 500 W heating on a 240 V supply
Documentation and supply
Installation instructions and a manual are supplied with the apparatus. Most Lab Exports products carry a one-year manufacturer warranty.
Lab Exports manufactures the Laboratory Drying/Warming Cabinet at its works in Laxmi Nagar, Delhi, and supplies it to school, college, research and industrial laboratories in India and 60+ countries, handling the export documents for each shipment. More about the company is on the About Lab Exports page.
Related Laboratory Instruments products
- Laboratory Incubator with Visibility Door (EL-LI-10773)
- Moisture Analyser (EL-LI-10772)
- Polypropylene Inverted Mobile Fume Cabinet (EL-LI-10776)
- Polypropylene Ducted Fume Cupboard (EL-LI-10777)
- Orbital Shaker, Digital (EL-LI-10770)
- Fume Cupboard, Ductless (EL-LI-10778)
The full range is in the Laboratory Instruments section of the Laboratory Equipment range.
Frequently asked questions
What temperature does the drying/warming cabinet reach?
The temperature is adjustable up to approximately 50 °C, for gentle drying and warming.
Why dry volumetric glassware in a drying cabinet rather than an oven?
Volumetric glassware is calibrated for an exact volume, and high oven temperatures can affect that calibration; the cabinet's low, adjustable heat dries it without that risk.
How much space is inside the cabinet?
It has a 113 litre capacity, internal dimensions of 460 x 728 x 341 mm and two adjustable wire shelves.
What is the price of the Laboratory Drying/Warming Cabinet?
Prices are not published on the website. Add the Laboratory Drying/Warming Cabinet to the Enquiry Cart with the Add To Cart button on this page, or email [email protected] with the house code EL-LI-10774 and the quantity, to receive a quotation.
Does Lab Exports manufacture the Laboratory Drying/Warming Cabinet?
Yes. Lab Exports manufactures the Laboratory Drying/Warming Cabinet at its works at 11/315, Lalita Park, Laxmi Nagar, Delhi 110092, under house code EL-LI-10774.
Request a quote
Email [email protected] with the house code EL-LI-10774 and the quantity, or add the Laboratory Drying/Warming Cabinet to the Enquiry Cart with the Add To Cart button on this page. Tender buyers can also see the Tenders and OEM page.
