Burner Tubing
Product Code : EL-B-10671
Quick answer: Burner Tubing is the flexible gas line that connects a laboratory burner to the bench gas tap. This version has a flexible steel core of 5/16 inch diameter, a rubber covering for a gas-tight run, and rubber connectors at both ends that fit all burners. It comes in 2, 3 and 4 ft lengths. Lab Exports manufactures it in Delhi for school, college, research and industrial laboratories.
Specifications
| Parameter | Specification |
|---|---|
| Type | Burner tubing, flexible steel |
| Diameter | 5/16 inch |
| Covering | Rubber covered for gas-tightness |
| End connectors | Rubber connectors at both ends |
| Lengths | 2 ft, 3 ft and 4 ft |
| Compatibility | Fits all burners |
How it is used
Plain rubber tubing is the traditional link between a gas tap and a burner, but it can kink, crack with age or be cut by a sharp bench edge. This tubing uses a flexible steel core that holds its shape and resists crushing, with a rubber covering that keeps the line gas-tight. The rubber connectors at each end push onto the tapered nozzle of the gas tap and the inlet of the burner.
Choose the shortest length that reaches comfortably from tap to burner without being stretched: 2 ft for burners set close to the service outlet, 3 or 4 ft where the burner must sit further along the bench or in a fume cupboard. Keep the tubing clear of the flame and hot plates.
- Check the tubing and connectors for cracks or wear before use.
- Push one connector fully onto the gas tap nozzle and the other onto the burner inlet.
- Route the tubing so it is not kinked, stretched or near the flame.
- Open the tap and test the joints for leaks with soapy water before lighting.
Key features
- Flexible steel core resists kinking and crushing.
- Rubber covering keeps the line gas-tight.
- Rubber connectors at both ends for a secure fit.
- 5/16 inch diameter to fit all burners.
- Offered in 2, 3 and 4 ft lengths.
Documentation and supply
Most Lab Exports products carry a one-year manufacturer warranty.
Lab Exports manufactures the burner tubing at its works in Laxmi Nagar, Delhi, and supplies it to school, college, research and industrial laboratories in India and 60+ countries, handling the export documents for each shipment. More about the company is on the About Lab Exports page.
Related Burners products
- Gas Lighter, Piezo Electric (EL-B-10670)
- Alcohol Burner Stand (EL-B-10672)
- Butane Lighter (EL-B-10669)
- Alcohol Burner, Wickless (EL-B-10673)
- Bunsen Burner with Stopcock (EL-B-10668)
- Alcohol Lamp with Metal Cap (EL-B-10674)
The full range is in the Burners section of the Laboratory Equipment range.
Frequently asked questions
What lengths does the burner tubing come in?
It is available in 2 ft, 3 ft and 4 ft lengths.
Will it fit my Bunsen burner?
The 5/16 inch tubing has rubber connectors at both ends and is designed to fit all burners.
What is the price of the burner tubing?
Prices are not published on the website. Add the burner tubing to the Enquiry Cart with the Add To Cart button on this page, or email [email protected] with the house code EL-B-10671 and the quantity, to receive a quotation.
Does Lab Exports manufacture the burner tubing?
Yes. Lab Exports manufactures the burner tubing at its works at 11/315, Lalita Park, Laxmi Nagar, Delhi 110092, under house code EL-B-10671.
Request a quote
Email [email protected] with the house code EL-B-10671 and the quantity, or add the burner tubing to the Enquiry Cart with the Add To Cart button on this page. Tender buyers can also see the Tenders and OEM page.
