Three Angle Bosshead
Product Code : EL-B-10829
Quick answer: The Three Angle Bosshead is a duraluminium connector with fixed positions at 90, 180 and 270 degrees, used to build multilevel and three-dimensional support constructions where rods branch in several directions. It comes in two sizes, for rods of 9-13 mm and 19-23 mm diameter, with a 4 mm thread. Lab Exports manufactures it in Delhi for school, college and research laboratories.
Specifications
| Item | Specification |
|---|---|
| Material | Duraluminium |
| Rod diameter, smaller size | 9-13 mm |
| Rod diameter, larger size | 19-23 mm |
| Thread | 4 mm |
| Angle positions | 90, 180 and 270 degrees |
How the three angle bosshead is used
An ordinary bosshead joins two rods in one plane. The three angle bosshead gives connection points at 90, 180 and 270 degrees, so rods can leave the joint in several directions and a frame can be built up in three dimensions: a horizontal cross rod, a second level above it and braces at right angles, all tied into the same node.
Duraluminium is an aluminium alloy containing copper and heat-treated for strength, so the fitting is far lighter than steel while keeping the stiffness a multilevel rig needs. The two sizes cover light rods of 9-13 mm and heavier 19-23 mm frame rods, so the same design serves small bench-top assemblies and larger frames alike.
- Choose the size that matches the rod diameter, 9-13 mm or 19-23 mm.
- Fit the bosshead on the main rod and tighten it at the required level.
- Connect the branching rods at the 90, 180 or 270 degree positions needed.
- Tighten all screws and check the frame for rigidity before mounting apparatus.
Key features
- Duraluminium body with a high strength-to-weight ratio
- Fixed angle positions at 90, 180 and 270 degrees
- Two sizes: 9-13 mm and 19-23 mm rod diameter
- 4 mm thread
- Suited to multilevel and three-dimensional constructions
Documentation and supply
Most Lab Exports products carry a one-year manufacturer warranty.
Lab Exports manufactures the three angle bosshead at its works in Laxmi Nagar, Delhi, and supplies it to school, college, research and industrial laboratories in India and 60+ countries, handling the export documents for each shipment. More about the company is on the About Lab Exports page.
Related Bosshead products
- Squared Bosshead (EL-B-10828)
- Hook Bosshead, 18/10 Stainless Steel (EL-B-10830)
- Safety Screw 18/10 Stainless Steel (EL-B-10827)
- Bosshead for Frames, Malleable Cast Iron, Chromium Plated (EL-B-10831)
- Bosshead, Coated Aluminium, Black (EL-B-10826)
- Bosshead for Frames, 18/10 Stainless Steel (EL-B-10832)
The full range is in the Bosshead section of the Laboratory Equipment range.
Frequently asked questions
What angles does the three angle bosshead provide?
It provides connection positions at 90, 180 and 270 degrees.
What rod sizes is the three angle bosshead made for?
It is available for rods of 9-13 mm and 19-23 mm diameter.
What is duraluminium?
It is a heat-treated aluminium alloy containing copper, strong for its weight, which keeps multilevel frames light.
What is the price of the three angle bosshead?
Prices are not published on the website. Add the three angle bosshead to the Enquiry Cart with the Add To Cart button on this page, or email [email protected] with the house code EL-B-10829 and the quantity, to receive a quotation.
Does Lab Exports manufacture the three angle bosshead?
Yes. Lab Exports manufactures the three angle bosshead at its works at 11/315, Lalita Park, Laxmi Nagar, Delhi 110092, under house code EL-B-10829.
Request a quote
Email [email protected] with the house code EL-B-10829 and the quantity, or add the three angle bosshead to the Enquiry Cart with the Add To Cart button on this page. Tender buyers can also see the Tenders and OEM page.
