Bosshead Swivel Type, 18/10 Stainless Steel
Product Code : EL-B-10834
Quick answer: The stainless steel swivel bosshead is an 18/10 stainless steel connector that turns through a full 0 to 360 degrees, so two support rods can be locked at any angle. A hand-turned heart screw secures it, with a 16.5 mm clamping diameter and a 6 mm thread. Lab Exports manufactures it in Delhi for school, college and research laboratories.
Specifications
| Item | Specification |
|---|---|
| Material | 18/10 stainless steel |
| Screw type | Heart screw |
| Clamping diameter (d) | 16.5 mm |
| Angle | 0-360 degrees, full swivel |
| Thread | 6 mm |
How it is used
The swivel joint between the two halves of this bosshead lets a clamp be set at any angle around the full circle before it is locked. That is what an angled set-up needs: a condenser sloping away from a distillation flask, a test tube held at an angle over a burner, or a support arm reaching across at a slant to hold a thermometer or delivery tube in position.
Made in 18/10 stainless steel, the fitting has no plating that can chip, so it keeps a clean surface in wet areas, near water baths and in rooms where apparatus is washed down after each class. The heart screw is turned by hand, giving a secure hold without tools.
- Mount one half of the bosshead on the stand rod and tighten the heart screw.
- Pass the clamp shank or cross rod into the other half.
- Swing the second rod round to the angle required.
- Lock the joint and check it before loading any apparatus.
Key features
- Full 0 to 360 degree swivel
- 18/10 stainless steel, with no plating to chip
- Heart screw tightened by hand
- 16.5 mm clamping diameter
- 6 mm thread
Documentation and supply
Most Lab Exports products carry a one-year manufacturer warranty.
Lab Exports manufactures the stainless steel swivel bosshead at its works in Laxmi Nagar, Delhi, and supplies it to school, college, research and industrial laboratories in India and 60+ countries, handling the export documents for each shipment. More about the company is on the About Lab Exports page.
Related Bosshead products
- Bosshead Swivel Type, Malleable Cast Iron, Chromium Plated (EL-B-10833)
- Bosshead (EL-B-10835)
- Bosshead for Frames, 18/10 Stainless Steel (EL-B-10832)
- Bosshead Cross Type Malleable Cast Iron Chromium Plated (EL-B-10836)
- Bosshead for Frames, Malleable Cast Iron, Chromium Plated (EL-B-10831)
- Bosshead Cross Type 18/10 Stainless Steel (EL-B-10837)
The full range is in the Bosshead section of the Laboratory Equipment range.
Frequently asked questions
Which screw does the stainless steel swivel bosshead use?
It is fitted with a heart screw, which is tightened by hand.
How does it differ from the cast iron swivel bosshead?
This version is 18/10 stainless steel with a heart screw and a 6 mm thread; the cast iron version EL-B-10833 is chromium-plated malleable cast iron with a thumb screw and an 8 mm thread. Both swivel through 0 to 360 degrees and have a 16.5 mm clamping diameter.
What is the price of the stainless steel swivel bosshead?
Prices are not published on the website. Add the stainless steel swivel bosshead to the Enquiry Cart with the Add To Cart button on this page, or email [email protected] with the house code EL-B-10834 and the quantity, to receive a quotation.
Does Lab Exports manufacture the stainless steel swivel bosshead?
Yes. Lab Exports manufactures the stainless steel swivel bosshead at its works at 11/315, Lalita Park, Laxmi Nagar, Delhi 110092, under house code EL-B-10834.
Request a quote
Email [email protected] with the house code EL-B-10834 and the quantity, or add the stainless steel swivel bosshead to the Enquiry Cart with the Add To Cart button on this page. Tender buyers can also see the Tenders and OEM page.
