Bosshead For Frames, 18/10 Stainless Steel
Product Code : EL-B-10832
Quick answer: The stainless steel frame bosshead is an 18/10 stainless steel connector for laboratory support frames, fixing a rod or clamp to the frame at 90 degrees with a ring screw and a socket screw. It has a 13.5 mm clamping diameter and a 6 mm thread, and suits frames that are washed often or used around moisture. Lab Exports manufactures it in Delhi for school, college and research laboratories.
Specifications
| Item | Specification |
|---|---|
| Material | 18/10 stainless steel |
| Screw types | Ring screw and socket screw |
| Clamping diameter (d) | 13.5 mm |
| Angle | 90 degrees |
| Thread | 6 mm |
How it is used
On a bench frame, every crossing of two rods needs a joint that stays square under load and can be released when the rig is rebuilt. This bosshead does that job in 18/10 stainless steel, the grade with about 18 percent chromium and 10 percent nickel, so it needs no plating and has no coating to chip or wear through.
Stainless steel is the sensible choice where frames stand near sinks, water baths, steam or cleaning solutions, or in rooms where fittings are wiped down routinely. The ring screw can be turned by hand, and the socket screw takes a hexagon key where a tool-tightened fixing is preferred.
- Position the bosshead on the frame rod where the joint is needed.
- Fit the second rod or clamp shank.
- Tighten the ring screw by hand and the socket screw with a hexagon key.
- Test the joint gently by hand before mounting glassware.
Key features
- 18/10 stainless steel, with no plating to wear
- Ring screw and socket screw fastening
- Fixed 90 degree joint
- 13.5 mm clamping diameter
- 6 mm thread
Documentation and supply
Most Lab Exports products carry a one-year manufacturer warranty.
Lab Exports manufactures the stainless steel frame bosshead at its works in Laxmi Nagar, Delhi, and supplies it to school, college, research and industrial laboratories in India and 60+ countries, handling the export documents for each shipment. More about the company is on the About Lab Exports page.
Related Bosshead products
- Bosshead for Frames, Malleable Cast Iron, Chromium Plated (EL-B-10831)
- Bosshead Swivel Type, Malleable Cast Iron, Chromium Plated (EL-B-10833)
- Hook Bosshead, 18/10 Stainless Steel (EL-B-10830)
- Bosshead Swivel Type, 18/10 Stainless Steel (EL-B-10834)
- Three Angle Bosshead (EL-B-10829)
- Bosshead (EL-B-10835)
The full range is in the Bosshead section of the Laboratory Equipment range.
Frequently asked questions
What angle does the stainless steel frame bosshead give?
A fixed 90 degree angle between the two members.
How does it differ from the cast iron frame bosshead?
This version is 18/10 stainless steel with a 13.5 mm clamping diameter; the cast iron version EL-B-10831 is chromium-plated malleable cast iron with a 13 mm clamping diameter. Both have ring and socket screws, a 6 mm thread and a 90 degree joint.
What is the price of the stainless steel frame bosshead?
Prices are not published on the website. Add the stainless steel frame bosshead to the Enquiry Cart with the Add To Cart button on this page, or email [email protected] with the house code EL-B-10832 and the quantity, to receive a quotation.
Does Lab Exports manufacture the stainless steel frame bosshead?
Yes. Lab Exports manufactures the stainless steel frame bosshead at its works at 11/315, Lalita Park, Laxmi Nagar, Delhi 110092, under house code EL-B-10832.
Request a quote
Email [email protected] with the house code EL-B-10832 and the quantity, or add the stainless steel frame bosshead to the Enquiry Cart with the Add To Cart button on this page. Tender buyers can also see the Tenders and OEM page.
