VIPOW AA Rechargeable Battery
Product Code : SCL-EAE-11191
Quick answer: The VIPOW AA Rechargeable Battery is a 1.2 V nickel-metal hydride (NiMH) cell in the standard AA (R6) size. Laboratories use it to power digital multimeters, data loggers, sensor modules and student circuit boards, recharging it instead of discarding single-use cells. It is mercury-free and cadmium-free. Lab Exports supplies it as a reseller to schools, colleges and universities.
Specifications
| Parameter | Value |
|---|---|
| Cell chemistry | Nickel-metal hydride (NiMH) |
| Size | AA (standard cylindrical R6) |
| Nominal voltage | 1.2 V |
| Heavy metals | Mercury-free and cadmium-free |
| Case | Sealed steel jacket with anti-leak insulation rings |
| Packing | Blister pack or bulk tray |
For the rated capacity (mAh), cycle life and cells per pack, email [email protected] for the current figures.
How it is used
A NiMH cell holds about 1.2 V for most of its discharge, a little below the 1.5 V of a fresh alkaline cell, and can be recharged many times in a suitable NiMH charger. In a busy teaching lab that makes it a practical power source for battery-operated meters, sensors, light boxes and electromagnet modules that are used every day.
- Charge the cells fully in a NiMH-compatible charger before first use.
- Clean the battery contacts of the device and insert the cells with the correct polarity.
- Recharge when the device shows a low-battery warning; do not mix charged and discharged cells in one device.
- Take the cells out of equipment that will be stored for a long period.
Key features
- 1.2 V nominal NiMH chemistry in the standard AA (R6) size
- Rechargeable, so one set replaces many single-use cells over a teaching year
- Low self-discharge type, so charged cells keep much of their charge in storage
- Sealed steel case with insulation rings to limit leakage near instrument contacts
- Mercury-free and cadmium-free construction
- Fits multimeters, data loggers, sensor modules and robotics kits that take AA cells
Documentation and supply
A basic handling and usage guide sheet is supplied with the cells.
Lab Exports supplies the VIPOW AA rechargeable battery as a reseller; it is not manufactured by Lab Exports. It is supplied from Delhi to schools, colleges and universities in India and 60+ countries, with the export documents for each shipment. More about the company is on the About Lab Exports page.
Related Electrical and Electronics products
- Rheostat 8" (100 ohm 1.6A) (SCL-EAE-11189)
- Portable Wheatstone Bridge (SCL-EAE-11193)
- Lamps in Parallel Kit (SCL-EAE-11194)
- Resistance in Series and Parallel Apparatus (SCL-EAE-11187)
- Lamps in Series Kit (SCL-EAE-11195)
- Domestic Circuit Apparatus (SCL-EAE-11196)
The full range is in the Electrical and Electronics section of the Physics Lab range.
Frequently asked questions
What voltage does the VIPOW AA rechargeable battery give?
It is a NiMH cell with a nominal voltage of 1.2 V. Most battery-operated lab instruments that take AA cells run normally on 1.2 V NiMH cells.
Which charger should be used?
Use a charger designed for NiMH AA cells. Chargers made for other chemistries, such as lithium-ion, are not suitable.
Request a quote
Email [email protected] with the house code SCL-EAE-11191 and the quantity, or add the VIPOW AA rechargeable battery to the Enquiry Cart with the Add To Cart button on this page. Tender buyers can also see the Tenders and OEM page.
