Battery Eliminator 2–12V 2A
Product Code : SCL-EAE-11333
Quick answer: The Battery Eliminator 2-12V 2A is a low-voltage DC supply for school and college circuits, giving 2, 4, 6, 8, 10 or 12 V, plus a 0 V position, from a rotary selector, with a maximum output of 2 A. It takes the place of dry cells in electricity practicals. Lab Exports manufactures it in Delhi for schools, colleges and universities.
Specifications
| Parameter | Value |
|---|---|
| Output type | DC |
| Selectable output | 0, 2, 4, 6, 8, 10 and 12 V DC |
| Maximum output current | 2 A |
| Output connections | Positive and negative terminals |
| Controls | Rotary voltage selector and ON/OFF switch |
| Fuse | Front-panel fuse arrangement |
Uses
In school and college electricity practicals the supply voltage has to be steady and repeatable. Dry cells run down during a lesson and give slightly different voltages from day to day; a battery eliminator gives the same selected output every time it is switched on, which keeps class results consistent.
The 2 V steps suit common experiment needs: the lower settings for torch lamps and simple series and parallel circuits, and the higher steps up to 12 V for resistor networks and other loads rated for that voltage. Students can also take readings at each step to see how current changes with applied voltage.
- Keep the supply switched OFF while the experiment circuit is assembled.
- Match the positive and negative terminals to the polarity marked on the circuit.
- Select the lowest suitable voltage, switch on and check that the circuit works as expected.
- Increase the voltage step by step if needed, staying within the 2 A output limit and the ratings of the components.
Key features
- Rotary control with 0, 2, 4, 6, 8, 10 and 12 V DC settings
- 2 A maximum output current
- Positive and negative terminals marked for correct DC polarity
- Independent ON/OFF switch keeps the output isolated during wiring
- Front-panel fuse position that is easy to reach
Documentation and supply
Most Lab Exports products carry a one-year manufacturer warranty.
Lab Exports manufactures the Battery Eliminator 2-12V 2A at its works in Laxmi Nagar, Delhi, and supplies it to schools, colleges and universities in India and 60+ countries, handling the export documents for each shipment. More about the company is on the About Lab Exports page.
Related Electrical and Electronics products
- Battery Eliminator (Socket) (SCL-EAE-11332)
- Battery Eliminator AC/DC (SCL-EAE-11334)
- Digital Transistor Characteristics Apparatus (SCL-EAE-11331)
- Digital Ohms Law Apparatus (SCL-EAE-11335)
- Transistor Characteristics Apparatus (Socket Type) (SCL-EAE-11330)
- Ohms Law Apparatus (with meters) (SCL-EAE-11336)
The full range is in the Electrical and Electronics section of the Physics Lab range.
Frequently asked questions
What is the maximum current of the 2-12V battery eliminator?
The published maximum output is 2 A across the 0 to 12 V DC range.
Does the battery eliminator replace dry cells in experiments?
Yes. It provides the low-voltage DC needed for school physics circuits and can be used for every session without replacing batteries.
What is the price of the Battery Eliminator 2-12V 2A?
Prices are not published on the website. Add the Battery Eliminator 2-12V 2A to the Enquiry Cart with the Add To Cart button on this page, or email [email protected] with the house code SCL-EAE-11333 and the quantity, to receive a quotation.
Does Lab Exports manufacture the Battery Eliminator 2-12V 2A?
Yes. Lab Exports manufactures the Battery Eliminator 2-12V 2A at its works at 11/315, Lalita Park, Laxmi Nagar, Delhi 110092, under house code SCL-EAE-11333.
Request a quote
Email [email protected] with the house code SCL-EAE-11333 and the quantity, or add the Battery Eliminator 2-12V 2A to the Enquiry Cart with the Add To Cart button on this page. Tender buyers can also see the Tenders and OEM page.
