Daniel Cell Substitute 1.08V
Product Code : SCL-EAE-11340
The Daniel Cell Substitute provides a nominal output of 1.08 V for compatible educational circuits. It avoids the routine preparation, electrolyte handling and electrode maintenance associated with a traditional wet Daniell cell, subject to confirmation that the supplied model uses an electronic or dry-cell-based design.
The apparatus can provide a convenient source for repeated physics practicals where a low-voltage reference or test source is required. Output tolerance, current capacity, terminal arrangement, enclosure construction and internal power system must be confirmed from the approved Lab Exports technical datasheet.
Key Features
Nominal 1.08 V output: Provides the voltage capacity stated in the product name.
Daniell-cell simulation: Intended to replace a conventional wet Daniell cell in compatible teaching experiments.
Reusable laboratory source: Supports repeated practical sessions without preparing electrolyte solutions for every class.
Classroom convenience: Reduces setup time for potentiometer and EMF-comparison experiments.
Low-voltage operation: Designed for compatible educational circuits requiring approximately 1.08 V DC.
Accessible connections: Output terminal type and polarity markings .
Stable experiment setup: Output regulation and tolerance .
Laboratory construction: Enclosure material, internal protection and power arrangement .
Technical Specifications
|
Specification |
Detail |
|
Product name |
Daniel Cell Substitute 1.08V |
|
Brand |
Lab Exports |
|
Product type |
Educational low-voltage DC source |
|
Nominal output voltage |
1.08 V DC |
What's Included in the Kit
1 × Daniel Cell Substitute with nominal 1.08 V output
Connecting leads
Internal battery or external power adapter
Operating instructions
Confirm all supplied components against the approved quotation and packing list.
Applications / Uses
Substituting for a Daniell cell in compatible physics experiments.
Comparing the EMF of two cells using a potentiometer.
Studying potential difference in low-voltage DC circuits.
Supporting potentiometer calibration and demonstration work.
Providing a reference source for introductory electrical measurements.
Reducing chemical preparation during repeated classroom practicals.
How to Use the Daniel Cell Substitute 1.08V
Place the unit on a clean, dry and stable laboratory bench.
Identify the positive and negative terminals before making connections.
Check that the experiment is compatible with a nominal 1.08 V DC source.
Keep the external circuit open or switched off while connecting the unit.
Connect the positive and negative terminals according to the experiment diagram.
Complete the circuit and take the required potentiometer or voltmeter readings.
Disconnect the source after completing the experiment.
Safety note: Do not short-circuit the output or connect the unit to an external power source unless the approved instructions require it. Observe correct polarity and confirmed current limits.
Care & Maintenance
Keep the terminals clean, dry and free from corrosion.
Clean the enclosure with a soft, dry cloth; do not use solvents.
Store the unit in a dry cabinet away from heat, moisture and impact.
Inspect leads and internal batteries periodically, where applicable.
Why Choose Lab Exports
Lab Exports manufactures, supplies and exports scientific and educational laboratory equipment for institutional users. Its range includes physics apparatus, electrical experiment equipment, science kits, mathematics kits and STEM teaching resources. The company also supports OEM and international procurement requirements. Buyers should obtain the model-specific datasheet, packing list and destination documentation before ordering.
Frequently Asked Questions
What is a Daniel Cell Substitute 1.08V used for?
It is used as a low-voltage source in experiments that would otherwise use a traditional Daniell cell, including potentiometer and EMF-comparison practicals.
Why does the unit provide 1.08 V?
The 1.08 V rating represents the nominal output specified for this product. The permitted tolerance should be confirmed in the technical datasheet.
Does it contain copper and zinc electrodes?
The internal construction has not been verified. Buyers should not assume that the substitute contains the electrodes or electrolytes used in a traditional Daniell cell.
Can it be used with a potentiometer?
Yes, it can be used in a compatible potentiometer circuit for EMF comparison or related teaching experiments.
Is it suitable for school laboratories?
Yes. It is suitable for supervised low-voltage physics practicals in schools, colleges and technical-training laboratories.
Does the output remain exactly at 1.08 V?
The nominal rating is 1.08 V, but the output tolerance and stability are not confirmed. Request these values when measurement accuracy is critical.
Request the verified specification and packing list from Lab Exports, or explore the electrical and electronics laboratory equipment range, the broader physics laboratory equipment collection, and the related simple cell student kit.
Suggested Product Image ALT Text
Daniel Cell Substitute 1.08V educational laboratory power source
Lab Exports 1.08 V cell substitute with positive and negative terminals
Low-voltage reference cell substitute for potentiometer experiments
Daniel cell substitute connected to a physics laboratory circuit
